Roche Manufacturing hollow core concrete productsAbout Roche Manufacturing - specialists in the design and manufacture of hollow core concrete productsRoche Manufacturing - specialists in the design and manufacture of hollow core concrete productsRoche Manufacturing hollow core concrete products : concrete saws, camber press, bed cleaners, vacuum machines, concrete distributorsContacting Roche Manufacturing - specialists in the design and manufacture of hollow core concrete products

Product Offering> Bed Cleaners

Roche manufacturing design and manufacture multi-purpose bed cleaners that are used to clean, oil, pull cables and cover beds. They range in size from 1.2 to 2.4m.

1.2m Multi Purpose Bed Cleaner

1.2m Bed Cleaner – Multi Purpose Machine

Overview

The Bed Cleaner is powered by a 4 cylinder LOMBARDINI Diesel engine. The various functions are all hydraulically controlled by an operator, who sits within the safety of the protective cabin. It pushes the debris off the beds and its 3 rotating brushes clean both the pallet and the rails.

Mould oil is sprayed on whilst travelling in the reverse direction. A light even coat is applied by the 4 spray nozzles to the pallet and rails in one pass at 45m/min. The Bed cleaner is also designed for simultaneously multi strand pulling. The hydraulic strand carrier can pull and deposit up to 10 x 12.5mm pre-stressing strands at a time. It also lifts and places them over and beyond the stressing abutments. This new design incorporates an optional cover trolley that is interchangeable and lays polythene covers onto the slabs in order to accelerate the curing time.

Features

  • Rotating bed brush
  • Two rail brushes
  • Interchangeable cover drums
  • Wire / Strand pulling unit
  • Flashing light

Functions

  • Cleans the casting bed
  • Cleans the bed rails
  • Pushes debris off the bed
  • Sprays the bed oil/release agent
  • Pulls the pre-stressing wires/strands
  • Lays the slab insulation covers

Specifications

  • Length: 5.00m
  • Width: 1.70m
  • Height: 2.40m
  • Weight: 2800 Kg
  • Travel Speed: 40 m/min
  • Motor: 31.5kW @ 2500rpm
  • Sprayer Tank: 45litres
  • Engine: 4 cylinder LOMBARDINI Diesel
  • Drive 2 Travel speeds: 4WD
  • Strand Puller: 10 x 12.5mm Strands

2.4m Multi Purpose Bed Cleaner

2.4m Bed Cleaners – Multi Purpose Machines

Overview

The Bed Cleaner is powered by a 4 cylinder Deutz Diesel engine. The various functions are all hydraulically controlled by an operator, who sits within the safety of the protective cabin. It pushes the debris off the beds and it brush cleans both the pallet and the rails.

Mould Oil is sprayed on whilst travelling in the reverse direction. A light even coat is applied by the 6 Spray Nozzles to the pallet and rails in one pass at 45m/min. The Bed Cleaner is also designed for simultaneously multi strand pulling. The hydraulic strand carrier can pull and deposit up to 10 x 12.5mm pre-stressing strands at a time. It also lifts and places them over and beyond the stressing abutments. This new design incorporates an optional Cover Trolley that is interchangeable and lays polythene covers onto the slabs in order to accelerate the curing time.

Features

  • Rotating bed brush
  • Interchangeable cover drums
  • Wire / Strand pulling unit
  • Flashing light

Functions

  • Cleans the casting bed
  • Cleans the bed rails
  • Pushes debris off the bed
  • Sprays the bed oil/release agent
  • Pulls the pre-stressing wires/ strands
  • Lays the slab insulation covers

Specifications

  • Length: 3.50m
  • Width: 2.80m
  • Height: 2.60m
  • Weight: 2600 Kg
  • Travel Speed: 40 m/min
  • Motor: 31.5kW @ 2500rpm
  • Sprayer Tank: 45litres
  • Engine: 4 cylinder LOMBARDINI Diesel
  • Drive 2 Travel speeds: 4WD
  • Strand Puller: 10 x 12.5mm Strands